| Comb |
Bevel |
Width |
Thickness |
Application |
| a |
| Olympic |
Medium |
64mm Convex |
3.3mm |
For all general purpose shearing with narrow gear and the 300 cutter |
| No.3 Wide |
Medium/long |
76mm straight |
5.5mm |
13 straight teeth to leave a protective layer on the animal |
| Countryman 7 |
Long |
76mm straight |
3.3mm |
For all general purpose shearing and dagging with wide gear. Ideal for the inexperienced shearer |
| Alpaca |
Medium/long |
76mm convex |
6mm |
For removing the upper layer of a camelid’s coat, leaving protection from cold or sunburn |
| Alpaca Pro |
Medium/long |
94mm concave |
6mm |
Designed for the expert camelid shearer wanting to remove the upper layer only |
| Protector |
Long |
92mm concave |
6mm |
9 tooth design for leaving a protective layer of fleece on sheep in hot or cold climates |
| CC23 & HB23 |
|
76mm convex |
3.3mm |
For clipping sheep or cattle with a handpiece. Use with the AC9U cutter on either wide or narrow gear |
| CC20 |
|
76mm convex |
3.3mm |
Designed for clipping with a handpiece but with only 20 teeth it enters better on dense coats |
| 20T Cattle |
Long |
76mm convex |
|
Used to clip cattle for show or slaughter. Can be used with wide cutters, or the AC9U cutter which fits both wide and narrow gear |
| 20T Sheep |
|
76mm convex |
3.3 to 3.6mm |
For fine dressing sheep, and clipping goats. Use with wide cutters or the AC9U cutter which fits both wide and narrow gear. |
| a |
